Showing posts with label remote control. Show all posts
Showing posts with label remote control. Show all posts

Thursday, 21 February 2013

ETA Remote Control Instalation

For 2007 Marzocchi offer a remote control device for the ETA on the XC600 model, this was a lot simpler than the TST version as this had an internal return spring.

1/ Remove the outer cable ferrule and using gear cable cutters shorten the outer cable by 55mm.
2/ Reinstall outer cable ferule and fit the cable to the cable guide.
3/ Using a 2.5mm hex key remove the centre fixing screw and using a 2mm hex key loosen both grub screws.
4/ Remove ETA cable rotor mechanism, making sure you note its resting position.
5/ Tighten the 2mm grub screws to lock the cable in the cable rotor.
6/ Rotate the cable rotor making sure to wrap the cable in the rotor’s cable groove.
7/ Install the rotor in the resting position.
8/ Using a 2.5mm hex key reinstall centre fixing screw.
9/ Check the function of the lever and adjust any cable play using the lock nut adjuster


 

TST Remote Control instalation

The original remote control for the TST5 cartridge could be an immense faff, especially if you followed the Marzocchi handbook and used there little tool. This guide was developed by Marzocchi's Euro tech support.
The models that used this were the 2007/8 Marathon and Corsa LT models